METS AMSTERDAM 2018

METS AMSTERDAM 2018

La Ditta CEREDI è lieta di confermare la propria presenza al Marine Equipment TRADE Show METS che si terrà ad Amsterdam Olanda dal 13 al 15 Novembre 2018.

Presso lo stand 01-776 il nostro Staff sarà lieto di presentarvi tutte le novità per la stagione 2018-19

Fiera del Camper Parma 2017

Fiera del Camper Parma 2017

Siamo lieti di informarvi che saremo presenti alla Fiera del Camper a Parma.

CER-DECK

CER-DECK

CER-DECK
What’is?
The Cer-deck is a non-toxic carpet of synthetic rubber foam suitable for indoor and outdoor application. 
Cer-deck is odorless and provides thermic and acoustic insulation.
Made in sheets bicolor has a non-slip surface, comfortable for bare feet and walking on with boat shoes.
Stable to light, resistant to oils, solvents and weathering.
Its low thermic conductivity, unlike other products similar teak, it guarantees an area not too hot even when exposed to the sun. 
Cer-deck is a floating material substantially antiadhesive and water-repellent, free from any form of absorption, so that dirt is deposited on the surface but does not penetrate inside.
It is available in two different densities: Cer-deck soft for maximum comfort and Cer-deck HD harder.
You can have it in different shapes with slats dug in contrasting colors, text, logos, trademarks.

Applications
Cer-deck applies as anti-slip coating, walk-deck, swim platforms, gangways and hatches.
It can be also applied on jet-ski, surf and SUP.
Due to its unique nature it can be applied even on curved and irregular surfaces.
Cer-deck is also applicable on Neoprene or PVC tubes.
Apply on: fiberglass, aluminum, abs, neoprene, PVC, wood.
Possible applications are endless, it can also be used to create gadgets, gifts such as coasters or mouse-pads.
How to apply
Cer-deck soft can be glued by one or two-components adhesives with  solvent base, of the type polyurethane or neoprene applying one or more coats.
It doesn’t require surface treatment before sticking.
With solvent-base adhesives is not required the maintenance in position as they guarantee a high stickiness and immediate grip, after 24 hours will be stable.
Note: Solvent-base adhesives are not suitables for abs and some plastic material (polystyrene).
Cer-deck soft can be stuck with paste glue applying thin films.
You can use paste glue type Sicaflex, some products 3M suitables for teak products or alternatives
products (those distributed by Wurth), in general paste adhesives based on polyurethane.
Our paste adhesive is also suitable even for abs and aluminum.
Note: when using paste adhesives, parts must be held in place for at least 24 hours.

Cer-deck HD features for the grooved lower face and so it is suitable for the installation with 
one-component paste adhesives.
It does not require any treatment before laying.
Use it and then applying a layer of suitable thickness of paste adhesive in accordance with what is done for the teak slats.
You can use paste glue type Sicaflex, some products 3M suitable for teak products or alternatives
products (those distributed by Wurth), in general paste adhesives based on polyurethane.
Our paste adhesives also suitable even for abs and aluminum.
Note: when using paste adhesives, parts must be held in place for at least 24 hours.
Cer-deck HP can also glued with solvent adhesives after filling the grooves with paste polyurethane adhesives.

How to clean
Cer-deck is a material which is substantially non-adhesive and water-repellent, free from any form of absorption, so that dirt is deposited on the surface but does not penetrate inside.
It is very easy to clean, just use water mixed with ordinary detersive and or detergents. You can quickly remove dust, salt, fuel, synthetic oil, mineral or vegetable, sunscreen, paint stains, coffee, fruit or other.
Cer-deck withstands the greater part of solvents, however, it is recommended to use only acetone
exclusively to remove streaks persistent due to the permanence for a long time of stains of oils or fuel.
Into Cer-deck brushed (similar teak), in the most difficult cases, after washing the surface with water, detergents and acetone, you can use sandpaper 60 or 80 grains acting in the direction of the veins.
On other surfaces (like ping-pong finishing) use soft toothbrush.

Aluminium Hatches

Aluminium Hatches "CE"

The CEREDI Company is pleased to introduce the new line of aluminum hatches with opening hinge in stainless steel Rif.Art.2515 .
All hatches comply with the requirements as per UNI EN ISO 12216 : 2004 and CE marked .

METS 2014

METS 2014

CEREDI Company is pleased to confirmits presence at the Marine Equipment TRADE Show METS to be held in Amsterdam Holland from 18 to 20 November 2014.
At our stand 05-222, our staff will present the latest in the season 2014-15.

Marine Equipment Trade Show METS 2013

Marine Equipment Trade Show METS 2013

CEREDI Company is pleased to confirm its presence at the Marine Equipment TRADE Show METS to be held in Amsterdam Holland from 19 to 21 November 2013.
At our stand 05-222, our staff will present the latest in the season 2013-14.

CEREDI Catalog on iPad

CEREDI Catalog on iPad

From now our catalog is also available on iPad!
Download free from the App Store our catalog up to date and available at any time.
Link to App Store available on our home page.

Marine Equipment TRADE Show

Marine Equipment TRADE Show

CEREDI  Company is pleased to confirm its presence at the Marine Equipment TRADE Show METS to be held in Amsterdam Holland from 15 to 17 November 2011.
At our stand 05-228, our staff will present the latest in the season 2011-12.

51° Edition International Boat Show  Genoa

51° Edition International Boat Show Genoa

CEREDI  Company is pleased to confirm its presence at the 51st Edition of the International Boat Show to be held in Genoa 1 to 9 October 2011.
At our stand L59-H60 Superior - Hall C, our staff will present the latest in the season 2011-12.



NEW Plastic Through Deck Fittings

NEW Plastic Through Deck Fittings

CEREDI company is pleased to announce a NEW line of Plastic Through Deck Fittings threaded clamping inches G. (Ref.Art:6040)
Glass reinforced Nylon produced in white colour, available in 5 different sizes, (3 / 4 ") - (1 / 2") - (1") - (1-1/4 ") - (1-1/2") 
in conformity with ISO 9093-2.

Boccole Passa-Scafi in Pollici G.

Boccole Passa-Scafi in Pollici G.

La ditta CEREDI è lieta di presentare la NUOVA linea di boccole Passa-Scafo con filetto di serraggio in Pollici G.

Prodotte in Nylon caricato Vetro colore bianco, disponibile in 5 differenti misure; (3/4")-(1/2")-(1")-(1-1/4")-(1-1/2") conformi alla nomativa ISO 9093-2. 

New website on-line

New website on-line

The CEREDI CNS is pleased to announce its new website, reviewed in content and functionality